Simon XT
User Manual
28
Special chime
To enable or disable the Special Chime feature:
1. Scroll up/down until the display shows Chime.
2. Press Enter. The current setting will flash.
3. Scroll up/down to toggle Special Chime On/Off.
4. Press Enter. The setting will stop flashing.
5. Press STATUS to exit.
An outlined bell icon will appear in the display when Special Chime is enabled.
Note: This menu will not appear if Special Chime sensors are not in your system.
System tests
The Simon XT system tests include:
• Sensor Test (see Testing sensors on page 38)
• Comm Test (see Testing communication on page 39)
• System download
System download
You can initiate a download call to program your system with the settings specified by your installer.
To initiate a download:
1. Scroll up/down till the display shows System Tests.
2. Press Enter. The display shows Enter Code.
3. Enter your master code with numeric keys.
4. Press Enter. The display now shows Sensor Test.
5. Scroll up/down till the display shows System Download.
6. Press Enter. The display shows Download In Progress.
7. Wait while your system calls the download center.
8. Display will show the result of the download. If the display shows Download Fail, contact your dealer.
9. Press STATUS twice to exit.
Note: Use this feature only when instructed by your installer or dealer.
To Next Page
Loading...
Need help?
General
