Chapter 3
Intercom controls
23
Selecting a station to call
To select a station to call, do one of the
following:
Last station called. Press the Intercom
button and the last station called will display
on the screen. If you want to call this room
again, press the knob.
Room station selection. If you want to call
another room station, rotate the knob to
sequence through all available room stations
until the room you want is displayed and
then press the knob.
All station selection. To call all stations,
rotate the knob until you see the All stations
option on the screen and press the knob. You
can also press the Intercom button twice to
automatically go to the All stations selection.
To Next Page
Loading...
