Chapter 4
Setup menu
41
To edit an existing station name, do the
following:
1. Select Edit name and press the knob. The
edit name text screen will be displayed
with the existing name entered.
2. Edit as desired and select Done to apply
the edits.
To return to the Setup menu, select Go back.
Call blocking screen
The Call blocking screen allows you to block
calls to selected room stations. This may be
needed if the room stations are too close to one
another and cause feedback, or to lock out calls
from selected stations.
To set call blocking, do the following:
1. Select the Call blocking menu item and
press the knob. The current entry will
flash.
2. Turn the knob to change the entry as
desired (Yes or No) and press the knob to
apply the setting.
To Next Page
Loading...
