SmartCom Room Station
Pocket Guide
44
To edit an existing source name, do the
following:
1. Select Edit name and press the knob. The
edit name text screen will be displayed
with the existing name entered.
2. Edit as desired and select Done and press
the knob to apply the edits.
You can enable or disable a source input in the
source list. Sources enabled will show up in the
sequence of source selection when pressing the
Music button. Disable sources that you do not
use or want to show up in this list.
To enable or disable a source, do the following:
1. Select Source type and press the knob.
2. Rotate the knob to select enabled or
disabled and press the knob.
To Next Page
Loading...
