GE TransPort - The APP Main Menu

TransPort
®
PT900 Quick-Start Guide
14
9.4 The APP Main Menu
Note: As an alternative to the Main Menu described below, you may use the
Slide Menu shown on the next page.
The main menu screen shown in Figure 13 below is the starting point for all PT900
programming steps. At a minimum, to get your PT900 system up and running to
begin taking measurements, program the following menus:
• “Selecting the Units of Measurement” on page 16
• “Activating Channel 1” on page 17
• “Programming the PIPE Menu” on page 18
• “Programming the FLUID Menu” on page 19
• “Programming the TRANSDUCERS Menu” on page 20
• “Programming the PLACEMENT Menu” on page 21
Figure 13: The APP Main Menu