Section 7 — Analyzing Measurements Onsite
148
View Revolutions
When revolutions (revs) are displayed, the time axis of a waveform chart
is labeled in revolutions of running speed, instead of your regular
measurement units.
To view the revolutions:
1. Display the waveform chart,
2. Set the RPM — The bottom axis will display the revs.
Waveform chart displaying revs on the X axis
Save Measurement
To save a measurement, press to stop the measurement > Press
Save. You now need to select or create a machine, point, and
location to save the measurement to.
To Next Page
Loading...
