Section 8 — Send and Receive Information
162
Connect to Wi-Fi Network
Connecting your instrument to a Wi-Fi network enables you to use any
Ethernet networking infrastructure you have access to. In order to use
Wi-Fi networking, you must have:
• An instrument with serial number 45000 or higher
• A suitable USB-Wi-Fi dongle (available from your local
Commtest distributor)
You will NOT be able to connect your instrument wirelessly where setting
up a connection requires a browser-based interaction — For example in
a hotel room or coffee shop where you are required to enter your name
or a code to activate the Wi-Fi connection. However, you will be able to
connect your instrument wirelessly to:
• A wireless router in a home-based network
• An office or industrial wireless network
• A Personal hotspot on a smartphone
To Next Page
Loading...
