GEA ECOVENT - Page 72

4. For optional version with proximity
switch holder (C):
4.1 Release the
switch bar (139) us-
ing the jaw wrench (a/f 17) on
the wrench at surface (139.1)
and unscrew.
4.2 Release the mounting for the
proximity switch (C) using the
jaw wrench on the wrench at
surface (C3) and unscrew
C2
C
C1
139
139.1
C3
Þ
The valve is now separated from the housing.
Spring-to-close valve (NO)
INFO Removal step: disconnect the valve insert fr
om the housing
1. W
ithdraw the valve from the housing.
Þ
The valve is now separated fr
om the housing.
72 / 128 - 9.5 Removing the valve
0000000607 - 002 - EN-GB