5 Technical data
The operating safety of the delivered machine is only guaranteed if the machine
is used as intended according to the sections of the operating instructions and
the purchase order.
Warning!
Overload of the pump!
► Do not operate the pump above the maximum permissible operating
data.
► Avoid even short-term pressure overloads (e.g. by pressure surges).
5.1 Serial number
The pump can be uniquely identified by the serial number. When ordering spare
parts, always quote the serial number. The serial number is indicated on the
nameplate.
5.2 Performance data
The pump was checked with water.
5.3 Noise emissions
The noise emissions caused by the pump are significantly influenced by their
application. They are very dependent on the speed and/or the pumping medium.
Therefore, no noise emissions can be specified. The loudest noise is caused by
the fan on the gear motor. After a sound pressure level of 80 dB [A], suitable
protective measures must be taken.
5.4 Maximum operating temperatures
Warning!
Danger by exceeding the maximum temperatures!
Bursting, spurting out of liquids due to overheating.
► Never exceed the specified operating temperatures.
► Operate the pump according to the ordering information. Read the
maximum operating temperature in the order papers.
5.5 Maximum pressures
Warning!
Pressure overload of the pump!
► Operate the pump according to the ordering data.
► Never exceed the specified maximum operating pressure and differential
pressure.
The pump’s maximum operating pressure pump depends on various factors:
–
Pump type
–
Type of connections
Technical data
Serial number
BA.280.YYY.001.GB_4
22 21.02.2022
To Next Page