1 General
1.1 Information about this document
Target group
These operating instructions are intended for:
–
the operator/user of the pump,
–
the maintenance and service personnel.
The instructions assume a general common technical understanding, which is
necessary for the commissioning, maintenance and servicing of pump units.
Sections that are aimed only at special authorised personnel are indicated by a
preceding note.
Text highlights
The following symbols and text formatting facilitate the reading of this document:
–
Bullets and lists points
–
Instructions.
Instructions that must be executed in a certain order are numbered according to
the sequence.
For the marking of safety instructions, please refer to Section 2.3, Page 13.
Technical changes
Types, technical data and spare part numbers are subject to technical change.
We reserve the right to implement changes due to technical progress.
1.2 Manufacturer address
GEA Hilge
Niederlassung der GEA Tuchenhagen GmbH
Hilgestraße 37-47
55294 Bodenheim
Germany
Phone +49 6135 7016-0
Fax +49 6135 1737
hilge@gea.com
gea.com
1.3 Customer service
Phone +49 6135 7016 100 (Sales support)
Phone +49 6135 7016101 (Service)
spareparts.hilge@gea.com
General
Information about this document
BA.280.YYY.001.GB_4
21.02.2022 9
To Next Page