–
The O-ring is deformed at one or more locations.
–
The O-ring has cracks.
–
The surface of the O-ring is porous and brittle.
–
The O-ring has lost its elasticity.
9.3.2 Gear lubrication
9.3.2.1 Relubrication interval
Relubrication interval
Oil temperature annually semi-annually quarterly
< 50°C x
50 - 75°C x
> 75°C x
9.3.2.2 Oil quantities
The amount of oil depends on the pump size and speed. It is specified in the
order documents and must be adhered to.
9.3.2.3 Oil types
Lubrication of the gear unit is necessary for the following reasons:
–
Lubricate bearings
–
Reduce wear
–
Reduce friction
–
Cooling
–
Corrosion protection
Use only the following lubricating oils or equivalent to lubricate the gear unit
Lubricating oils (examples):
Food category:
–
Shell Cassida GL
–
Mobil Food
–
Dow Food
Industry
–
Shell Omala
–
Castrol Alphasyn
–
Mobil SHC 600
–
Mobil 600
Hint!
The type of oil used can be found in the order papers.
Maintenance / servicing
Pump maintenance
BA.280.YYY.001.GB_4
21.02.2022 45
To Next Page