GEA VARIVENT DN 65 - Disconnecting the Valve from the Housing; Disassembling the Valve into Individual Parts

2.
Pull the control top (B) upwards.
3.
Remove switch bar.
®
Done
10.5.3 Disconnecting the Valve from the Housing
Fig.13
Notice
Sensitive parts
The surfaces of the balancers are sealing surfaces and must not be
damaged.
► When removing the valve from the pipe take care not to hit the balancer
against the housing. Carefully disassemble the valve.
Carry out the following steps:
1.
Carefully remove the valve insert out of the housing (402).
®
Done
10.5.4 Disassembling the Valve into Individual Parts
Maintenance
Disassembly
430BAL008386EN_3
44 07.02.2022