Geeetech A30 Building Instructions

Contents
Safety Instructions .......................................................................................................................................... 1
Preparation ...................................................................................................................................................... 2
1. Unfold the Box and Check the Package .................................................................................................. 3
2. Assembly ................................................................................................................................................ 4
3. Wiring ..................................................................................................................................................... 9
4. Warm Tips .............................................................................................................................................16

Geeetech A30 Specifications

General

Build Volume	320 x 320 x 420 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB, SD card
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Supported Filaments	PLA, ABS, PETG
Display	LCD
Power Supply	24V
Bed Temperature	Up to 110°C
Nozzle Temperature	Up to 250°C
Printing Platform	Removable glass platform