2
Preparation
1. Unpack the kit and check if all parts are in the box. Please check the condition of each part
since there might be some damage during shipping. To help you with this, there is BOM in
the box and each bag is labeled with its part number.
2. Contact our customer service immediately by email or through the website if you find any
missing or damaged parts. And at the bottom of the BOM, there is a signature of the checker.
Please take a picture of it and attach the picture in your mail.
3. Before your assembly, please read through each chapter of this assembly
manual to gain an overall idea of what is involved and how long it might
take to complete the assembly job.
4. As a preparation job, you can put all the part in order to save your time, especially the
screws and nuts. Do not mix them up.
5. Ensure you have the necessary skills to carry out the assembly job or entrust someone who
does.
6. Work on a big firm table or bench in a clean dry well-lit area.
7. Since this kit contains tiny parts, please keep them away from kids under 3.
8. Ask for help if you run into any problems --- our contact details are on the website and we
will always do our best to solve any problems encountered.
9. For different batches, some parts of the kits may have changed. If the parts listed in
this instruction and what you received is slightly different, please don't worry. These
changes will not affect your installation and usage.
10. Please watch the building instruction video at https://youtu.be/hM_ZYANWnGw
To Next Page
Loading...
Need help?
General
