Geeetech A30 Manual

GEEETECH
- 10 -
SUPPROT
Thanks for choosing Geeetech, we strive to provide a satisfied
and pleasant shopping experience for you. And we do understand
there may be some questions you may encounter when using our
product. If so, you can contact us directly on Facebook (Geeetch 3D
PRINTER USER CLUB (OFFICIAL)) or post on our forum, our
technique staff will help you resolve it. For more detailed
information, you can also visit Geeetech wiki from our home page.
(https://www.geeetech.com)
For detail building instructions, please download at:
https://www.geeetech.com/geeetech-a30-3-dprinter-p-1025.html
For detailed building videos, please check at YouTube:
https://youtu.be/hM_ZYANWnGw
Subscribe our YouTube channel for more videos.
https://www.youtube.com/user/geeetech

Geeetech A30 Specifications

General

Build Volume	320 x 320 x 420 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB, SD card
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Supported Filaments	PLA, ABS, PETG
Display	LCD
Power Supply	24V
Bed Temperature	Up to 110°C
Nozzle Temperature	Up to 250°C
Printing Platform	Removable glass platform