Geeetech A30 Manual

GEEETECH
- 5 -
PACKAGE LIST:
This list includes all the parts required to assemble your A30 3D
Printer. After you received your package, please check if all the parts
listed are included. Also make sure all the components are in good
condition and not damaged during shipping. If anything is missing
please contact with our customer service straight away, provide us the
NO. , Name, and Qty.
No. Name Specs Qty. Pic.
1
Bottom frame
parts
Pre-assembled
1
2
Vertical frame
parts
Pre-assembled 1

Geeetech A30 Specifications

General

Build Volume	320 x 320 x 420 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB, SD card
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Supported Filaments	PLA, ABS, PETG
Display	LCD
Power Supply	24V
Bed Temperature	Up to 110°C
Nozzle Temperature	Up to 250°C
Printing Platform	Removable glass platform