134
5. Follow the instructions of the charging
pile to complete the charging.
6. After full charge or when it is necessary
to end charging, the charging shall be
ended according to the instructions of
the charging pile;
7. Unlock the electronic lock of the
charging socket, press the button on the
charger and pull out the charger as
soon as possible;
8. Close the protective cover of the AC
charging interface and the charging port
cover, and put the charger back to the
original position of the charging pile.
DC fast charging of charging
station
Operating steps
1. Stop the vehicle stably and switch the
gear to the parking gear (P);
2. Unlock the vehicle, press the charging
port cover, the charging port cover pops
up, and take out the protective cover of
the DC charging interface;
3. Remove the special DC charger for the
charging pile from the charging pile;
4. Press the button on the DC charger, and
insert the charger into the DC charging
interface of the vehicle body;
5. Follow the instructions of the charging
pile to complete the charging;
6. After full charge or when it is necessary
to end charging, the charging shall be
ended according to the instructions of
the charging pile;
7. Unlock the electronic lock of the
charging socket, press the button on the
charger and pull out the charger as
soon as possible;
8. Close the protective cover of the DC
charging interface and the charging port
Starting and driving
To Next Page
Loading...
Need help?
General
