Unscrew all the wheel nuts
Unscrew nuts before jacking the vehicle up.
Loose the nuts anti-clockwise. To have the
max torque, t the wrench onto the nut, hold
the handle on the right as illustrated above.
Hold the handle and pull it upward. Be careful
not to let the wrench slip off the nut.
Do not remove the nuts, simply unscrew it to
half loose.
Warning
Do not apply oil or lubricant on bolts or
nuts. They get loose and so wheels may fall
off. This will result in serious accidents.
Block the wheel
When the car is jacked up, put a stopper under
the wheel diagonal to the leaking tire, to pre-
vent the vehicle from sliding.
To block the wheel, put the stopper in front of
the front wheel or behind the rear wheel.
128
Part III
To Next Page
Loading...
