Warning
Replace the tire
Take off the wheel nuts and replace the wheel
Put the leak tire aside quickly.
Roll the spare tire to the installation position,
and align the bolt with the wheel hole. Lift the
wheel till the top bolt gets through the hole.
Rotate the tire and push it backward till all the
other bolts go through the holes.
Position the carjack under the correct jacking
point as shown illustrated above.
Make sure if the carjack is placed on at and
solid ground.
Jack the vehicle up
After it has been checked that nobody is in the car,
jack the vehicle up high enough to install a spare tire.
Remember, installation of a new tire requires more
off-ground clearance.
To jack the car up, put the handle into carjack (loose
connection), and rotate clockwise. When carjack
touches the vehicle and start jacking it up, check
again if the carjack is positioned in the right place.
Nobody is allowed to go under the vehicle
when it is supported only by a carjack.
129
Part III
To Next Page
Loading...
