High/Low Beams ---- when using the high beam,
turn on the headlight and press down the lever (po-
sition 1). When using the low beam, lift the lever
(position 2).
The headlight high beam indicator (blue) on the
instrument panel indicates that the high beam is on.
Headlight high beam flashes (position 3) -- fully
lift the lever. When the lever is released, the head-
light high beam goes off.
Turning the knob to "OFF" can also ash the head-
light high beam.
High and Low Beams
3
2
1
3
2
1
Notice
In order to prevent the discharge of battery,
do not turn on the switch for a long time
with the engine stopped.
RHD
LHD
53
Part I
To Next Page
Loading...
