Hazard Warning Light
You can press this switch to turn on the hazard
warning light.
All turn signal lights ash. You can press this
switch to turn them off.
When the vehicle has to stop at the place liable
to trafc accidents, you must turn on the emer-
gent ash light to warn other drivers.
Park the car as far as possible away from the
road.
When the emergent ash light goes on, the turn
signal light won’t work.
When sending out the turn signals, push the
headlight turn signal light lever outward or pull
it back
The ignition key should be set to "ON" posi-
tion.
The lever will resume its original place after
the vehicle negotiates a corner. However, the
lever must be manually pushed back to its
original place after a driveway transfer.
When sending out the driveway transfer signal,
push the lever outward or pull it back to the
pressure point (position 2) and hold it.
If the turn signal light indicator (green) on the
instrument panel flashes faster than ever, it
indicates that the front or rear turn signal light
bulb is burned.
Turn Signal Light
3
2
1
3
2
1
RHD
LHD
54
Part I