Choose songs to play by name
User can select MP3 songs to play by their names.
1.Press the right knob and select“CHAR SCH”
from TRK SCH/FILE SCH/CHAR SCH/MP3
001, and “FILE SCH”will be showed on the
screen.
2. Press the left knob to enable character
choice, the rst character that can be selected
will be showed on the screen.
3.Screw the left knob to select the character
that you want.
4.Press the left knob more than 0.5 second
to confirm the character. The current playing
status will not change if there is no relevant
character that you selected.
5.Press the left knob again to start playing.
Character can be selected are: A-Z, 0.9,*, and _.
Choose song in a folder to play
Chinese folder and les can’t showed.
User can select MP3 songs in a folder to play.
1.Press the right knob and select“FILE SCH”from
TRK SCH/FILE SCH/SJAR SCH/MP3 001, and
the“FILE SCH”will be showed on the screen.
2.Press the left knob to enable folder choice,
the rst folder will be showed on the screen.
3.Screw the left knob to select the folder that
you want.
If there are many layers, the rst layer will be
red, the second layer next, and maximum 3
layers can be read.
4.Press the left knob to enable song choice, the
file name of first song will be showed on the
screen.
5.Press the left knob to select to song that you want.
6.Press the left knob again to start playing.
MP3 playing will keep the original playing
status in the whole setting process.
The setting process will abort if no operation is
10 seconds.
81
Part I
To Next Page
Loading...
Need help?
General
