6
101
driver's visual detection. Please do
not rely only on it to reverse.
• The reversing camera cannot
detect objects outside the visual
range of the camera, such as those
under the bumper or vehicle.
• The reversing camera system can
only be used as a reverse assist
system and cannot replace the
driver's objective analysis of
obstacles.
• It is forbidden to use the reversing
visual system in long-distance and
fast reverse operation or where
there are lateral passing vehicles.
• The reversing camera will enlarge
and distort the field of view. The
image displayed on the display
screen may be different from or
cannot accurately reflect the real
object, and there are differences
between the distance displayed on
the display screen and the actual
distance.
• The reversing camera will be
blurred due to the influence of ice,
snow, mud and other sundries.
Please keep the camera clean at
any time.
• In extreme weather, such as
strong light, rain and snow may
affect the display effect of rearview
mirrors and reversing image.
Please adjust the vehicle speed
and driving mode.
Function on and off
The reversing image will be turned on
automatically when the vehicle is shifted to
reverse gear (R); it will be turned off
automatically after the vehicle exits reverse
gear.
Position of reversing camera
The reversing camera is installed on the
high-mounted brake lamp. The working
range of the rear view camera is very
limited and it cannot capture objects near
the corner or under the bumper. The
displayed image may vary depending on
the direction of the vehicle or the road
condition. The distance displayed on the
screen is different from the actual
distance.
Reversing assist line
Starting and driving
To Next Page
Loading...
Need help?
General
