130
The vehicle must be parked on a flat
ground when you detect the coolant level.
Check whether the coolant level in the
expansion tank is between MAX and MIN
marks. If the coolant level is lower than the
MIN mark, fill the expansion tank with
coolant according to the specified
procedure.
If the coolant level drops significantly in a
short period of time, it means that there
may be leakage in the cooling system.
Please contact a Farizon Auto after-sales
service station for maintenance as soon as
possible.
Adding of coolant
1. Slowly rotate the pressure cap
counterclockwise. If you hear a hissing
sound, wait until the sound disappears
before opening it. A hissing sound
means that there is still pressure
inside.
2. Continue to rotate the pressure cap
and remove it.
3. Add appropriate amount of coolant to
make the coolant level at the middle
position between MAX and MN scales
of expansion tank.
The coolant expansion tank pressure
cap must be opened after the
cooling system is completely cooled,
otherwise there may be a risk of
scald.
If the coolant splashes out, dry it with
a dry cotton cloth after ensuring that
the vehicle is powered off to avoid
damaging other parts or paint
surfaces in the engine compartment.
Repair and Maintenance
To Next Page
Loading...
Need help?
General
