3
43
Gear 3: There is only the driver in the
vehicle, and the cargo compartment
is full.
Wiper and Washer
Wiper control combination
switch
Operation of wiper control
combination switch
Wiper inching wiping
Pull the wiper control handle towards
direction B and release it. The wiper
control handle will automatically return to
"O" gear, and the front wiper performs
inching wiping operation.
Front wiper OFF
When the wiper control handle is in "O"
gear, the front wiper will be turned off.
Automatic wiping of front wiper
Pull the wiper control handle towards
direction A to "AUTO" gear, and the front
wiper performs automatic wiping
operation. At this time, the wiper control
system automatically adjusts the wiping
speed according to the rainfall.
The wiping speed can be adjusted by
rotating the automatic wiper sensitivity
adjustment knob. When the mark "–"
Instrument and control
To Next Page
Loading...
