6
91
Noise and vibration
When the electric vehicles are used, you
will hear or feel noise and vibration
different from those of traditional fuel
vehicles. The following noises and
vibrations are normal:
• Noise of drive motor and rear axle
reducer during operation.
• Noise of compressor and cooling fan of
A/C in operation.
• Noise and vibration of relay opening
and closing when the HV system is
opened and closed.
• The sound of pedestrian warning
system when the vehicle is running at
low speed.
• Noise of water pump and cooling fan
during charging.
Gearshift operation
Shift information
The gearshift device of this vehicle is knob
type, which can be rotated clockwise/
counterclockwise to switch gears. There
are 3 gears, namely drive (D), neutral (N)
and reverse (R).
Before gear shifting, the vehicle
needs to be in READY status and
confirm that the "READY" indicator
on the instrument panel illuminates;
when the gear shifting operation is
wrong, the gear display icon of the
instrument cluster will flash 3 times
with 1 prompt sound.
1. D - forward gear
2. N - neutral
3. R - reverse
Neutral (N)
When the vehicle is in this gear, the drive
motor cannot output power, and the
gearbox will not assist parking.
When the vehicle is stationary and started,
depress the brake pedal and turn the gear
knob counterclockwise to shift from N
Starting and driving
To Next Page
Loading...
Need help?
General
