50
Cargo compartment reading
lamp
Press the reading lamp switch to the left
position for door control function. The
reading lamp will turn on when the side
sliding door or tailgate is opened, and turn
off after the door is closed.
Reset the reading lamp switch to the
parallel position and turn off the reading
lamp.
Press the reading lamp switch to the right
position and turn on the reading lamp.
Cab configuration
Instrument panel switch
group
Instrument panel left switch
group
1. ECO button
Press this button to enable the
economic mode, and at the same time,
the instrument cluster economic mode
indicator will illuminate. In the
economic mode, when the vehicle is
driven, its dynamic response is smooth
and it can obtain a large endurance
mileage.
2. Electronic stability control (ESC)
OFF button
The ESC function is enabled by default.
Press this button to turn off the ESC
function, and the instrument cluster
ESC OFF indicator will illuminate. Press
this button again to enable the ESC
function.
In order to maintain stable control of
the vehicle during driving, it is
recommended that the system be
always on.
Instrument and control
To Next Page
Loading...
Need help?
General
