84
Automatic re-lock
After the vehicle is unlocked with the
remote control key, if no door opening or
other operations have been performed on
the vehicle, the vehicle will automatically
re-lock after 30 seconds.
Collision unlocking
After a collision accident, the door lock will
be unlocked while the airbag pops up. At
this time, the hazard warning lamp flashes
and the high voltage system is powered off
so that drivers and passengers can quickly
and safely leave the damaged vehicle.
Vehicle is started
Start switch
Insert the key into the ignition lock cylinder
and rotate the key to different positions.
The start switch status can be divided into:
LOCK/OFF: The vehicle is powered off.
When the key is in LOCK/OFF position,
depress the brake pedal and turn the key
to START to directly start the vehicle.
ACC: low-voltage battery power supply
status. When the vehicle is not started,
turn the key to ACC mode without
depressing the brake pedal. When the
Start switch is turned to ACC position,
depress the brake pedal and turn the key
to the Start switch once to start the vehicle,
and the vehicle enter a drivable status
(READY status).
When the vehicle is not started and
the Start switch is at ACC position,
the battery power will be consumed.
If the low-voltage battery is
consumed for a long time, you may
not be able to start the vehicle.
When the A/C or entertainment
function is used for parking, it is
Starting and driving
To Next Page
Loading...
Need help?
General
