32
In the standard mode, the driving range is
calculated based on the overall average
energy consumption of the vehicle; in the
dynamic mode, the driving range is
calculated based on the dynamic energy
consumption output by current driving
habits. The driving range displayed in this
mode is relatively close to the actual
driving range.
Trip mileage
It displays the single mileage of the vehicle.
When the vehicle is stationary, press and
hold the "RESET" button on the top of the
light control lever for about 3s to reset the
trip mileage.
Total mileage
Display the accumulated mileage of the
vehicle.
Energy recovery level
It displays the currently set energy
recovery level, and can be set by pressing
the energy recovery button of dashboard
switch group.
Shift information
The gear information will be displayed in
real time at the middle and lower parts of
the instrument cluster. In case of gearshift
operation error, the current gear will flash
3 times with a prompt tone.
Instrument and control
To Next Page
Loading...
Need help?
General
