82
Unlocking and locking doors
with mechanical key
Pry out the driver door lock cylinder trim
cover with a suitable tool to expose the
driver door lock cylinder.
Wrap the tool with a soft cloth during
operation; otherwise, the surface of
door handle will be scratched. Be
careful not to break the clip behind
the trim cover.
Unlocking
Insert the key into the driver side door lock
and rotate it clockwise to unlock the door.
Locking
Insert the key into the driver side door lock
and rotate it counterclockwise to unlock
the door.
If the vehicle is in the remote locking
anti-theft status, by inserting the key
rack into the lock cylinder to unlock
the door, the vehicle anti-theft alarm
function will be triggered when the
door is opened. The mechanical key
cannot release the anti-theft
function, so it is necessary to unlock
the vehicle with the remote control
key to release the anti-theft alarm.
It is recommended to use this
method only under special
circumstances, such as when the
remote key battery is too low.
It is recommended to carry the
remote control key with you.
Interior unlocking and locking
Unlocking
Press the unlock button on the driver
door combination switch to unlock the
door.
Interior unlocking can only be carried
out when all doors are locked.
Starting and driving
To Next Page
Loading...
Need help?
General
