66
Announce1/Announce2. Use the key to end the
playing at any time.
Restore Announce1/Announce2
Way 1: Using the menu
1. Press the TAM soft key in Standby mode.
2. Press the Select soft key to choose Announce.
3. Press Select soft key to choose Announce1 or press
the Down key to choose Announce2, then press the
Select key to confirm.
4. Press the
or key repeatedly to choose
Default, press the Select key to confirm.
5. The LCD will show Confirm ?. Press the Select key to
restore the default Announce1 /Announce2 or press the
Back key to cancel.
Way 2: Using the base unit
In the active mode (all lights on) press the
or
key to play Announce1/2, then press and hold the
key to restore it to the default one, you will hear a confirm
tone. The default Announce1 or Announce2 will be
played back after that.
TAM FUNCTIONS(AMPLIDECT285™ ONLY)
To Next Page
Loading...
