12
CONNECTING TO THE EXT-DSC CONTENT SERVER SERVER
6. Look in the list for the Ethernet MAC address that matches the serial number
of the EXT-DSC (e.g., 0:1c:91:0:0:6e for serial number 001c9100006e). All
MAC addresses of the EXT-DSC start with 0:1c:91.
7. The network name of the EXT-DSC unit appears on the fi rst column of the
matching line, if none is registered “?” is shown.
8. The IP address of the EXT-DSC unit appears, between parentheses, on the
second column of the matching line.
9. You may now close the Terminal application if so desired.
10. Now you can use either the network name, if one is registered or the IP
address to address the unit on the network.
Connecting To The EXT-DSC Content Server
This section explains how to connect to the EXT-DSC content using the Mac OS
X Finder.
1. Click anywhere on your desktop to bring up the Finder menu bar at the top
of the screen.
2. From the Go menu, select Connect to Server... The Connect to Server dialog
appears.
3. In the Server Address textbox type:
http:// followed by the IP address or network name of the EXT-DSC unit and
:81/.
For instance http://192.168.1.10:81/ to connect to the unit with the
192.168.1.10 IP address.
To Next Page
Loading...
