5
1 Mini-Plug to RS-232 Serial Communications Port
This port will accept a mini-plug to RS-232 serial communications adapter for
control of external devices.
2 Ethernet Port
This port will accept a Ethernet cable for the connection to a network. Once
connected, user can control the units via the built-in WEB interface of the DSD
(Digital Signage Director) software.
3 USB A Port
This port supports USB 2.0 Hi-Speed with a bandwidth of up to 10 Mbyte/s.
This USB interface can be used to extend the local storage through memory
sticks or hard drives. The same interface can support external devices such as
touch screen controllers.
4 LED Indicator
This LED serves as an indicator for the unit’s current status. It will blink a
GREEN color every second when operation is normal. If the LED is RED or
ORANGE, this will indicate an error.
5 ON/OFF Reset Button
This button will initiate a manual reboot of the unit. Press and hold this button for
~5 seconds to initiate the reboot process.
6 5V DC Power Receptacle
This port will accept power from the included 5V DC power supply.
7 HDMI Output
This port will accept a single HDMI compliant device. This port supports both
audio and video.
8 3.5mm L/R Analog Stereo mini-jack Output
This port can be used to output audio to an external audio amplifi er/device. This
port will accept a standard 3.5mm analog stereo connector.
9 VGA Output
This port will accept a single VGA compliant device. This port supports only
video.
PANEL DESCRIPTIONS
To Next Page
Loading...
