19
CONFIGURING DISPLAY SETTINGS
Confi guring Display Settings
This tutorial explains how to confi gure the display settings of your EXT-DSC unit
using its administration HTTP server.
1. In the main page of the HTTP server of your unit, select in the left menu the
Display Settings item that you fi nd under Administration. The current display
settings will be shown on your browser.
2. Choose the output resolution to activate. The Basic menu lets you select
between seven presets resolutions. For fi ner settings, you need to use the
Advanced menu.
The aspect ratio of your display will be automatically updated according to
the chosen resolution. You can modify it by checking the Force aspect ratio
check box.
3. Choose your display orientation. In case you are using a vertical display
make sure you select the correct rotation direction.
4. If you require audio output, you must enable it using the Enable Audio
Output check box.
The preview icon on the right helps you to choose the correct settings for your
display.
All changes need to be confi rmed with the Apply button, which will trigger a
reboot of the unit. The reboot process requires about 2 minutes to complete.
To Next Page
Loading...
