20
USING A USB DRIVE WITH THE EXT-DSC
Using a USB Drive With the EXT-DSC
This tutorial explains how to confi gure USB drive as storage source by your EXT-
DSC unit using its administration HTTP server.
1. In the main page of the HTTP server of your unit, select in the left menu the
Media Sources item that you fi nd under Administration. The current settings
will be shown on your browser.
2. Make sure that the Primary source is set to “Local Storage”. The page
indicates that the local storage is currently set to the EXT-DSC internal
storage.
3. Check the “Set Local Storage to USB storage device when available” check
box
4. Press Apply.
5. Insert your USB storage into the USB connector of the EXT-DSC. Wait for
a few seconds and then press the Reload button. The page should indicate
To Next Page
Loading...
