page | 7
Getting Started
Installation
4. See Supplementary Connections for instruction on connecting USB, IR, RS-232,
and audio cables.
5. Connect the included 5V DC locking power supplies to the Sender unit and Receiver
unit. Do not overtighten the locking connectors. Connect the included AC power
cords from the power supplies to available electrical outlets.
6. After a few moments, the DVI source will be displayed.
NOTE: When using HDMI sources with an HDMI-to-DVI adapter,
the HDMI audio will be passed through to the DVI Out connector on
the Receiver unit.
To Next Page
Loading...
