gefran 850 - PAR - Selecting Parity; SCANR - Setting Delay between Two Consecutive Modbus Communications to Slave Nodes in Serial Connection

80209C_MHW_850-1650-1850_02-2020_ENG_pag. 164
4.25.3. PAR - Selecting parity
Acronym Scrolling message Submenu Attributes
PAr PARITY SERIA R W
The parameter shows and sets the parity used in serial communication.
Unit of measurement: -
Options: NONE = No parity
ODD = Odd parity
EVEN = Even parity
4.25.4. SCANR - Setting delay between two consecutive Modbus communications to slave
nodes in serial connection
Acronym Scrolling message Submenu Attributes
SCANR SCAN RATE MODBUS MASTER SERIA R W
This parameter shows and sets the delay, in milliseconds, between two consecutive modbus communications toward
known slaves in serial connections.
The parameter only appears if the Modbus TCP option is available.
Unit of measurement: ms
Options: 0...9999