____________________ _
ADL300-EPCv2- User Guide Page 47 of 64
The EPC status is displayed. The following values are possible:
0 ready
1 jog forward
2 jog Reverse
3 Zero Cycle 1 of 2
31 Zero Cycle 2 of 2
4 SelfStudy 1 of 2
41 SelfStudy 2 of 2
5 Floor Call
51 floor call reverse
52 floor call Forward
6 Forward
61 Forward command 2 of 3
62 Forward command 3 of 3
7 Reverse
71 reverse command 2 of 3
72 Forward command 3 of 3
8 stop normal
9 Revelling
91-191 revelling floor call reverse
92-192 revelling floor call forward
10 Battery Run
101 Battery Run Reverse
102 Battery Run Forward
Positioning device ready status is displayed.
On if the following condition is true:
vEPCStatus = 0 (ready)
and
ZeroFound (zero cycle executed)
and
SelfStudyOk (Self study executed)
and
sysDriveOk = ON (Drive not in alarm condition)
To Next Page
Loading...