13. Operating Instructions
2-77
Precautions
• Make proper use of the general attachments following
the handling instructions in the operation manual provid-
ed by the manufacturer of the general attachments.
13-21-4. Long-term storage
If the hydraulic tool is not used, do the followings:
• Close the stop valves.
• Disconnect the hoses for the hydraulic tool. Wind the
screw plug R (PT) 3/4 with seal tape and tighten them to
the stop valve.
13-21-5. Specification
Approximate hydraulic oil flow at the rated engine speed.
Model Z27 : 14.0 GPM (53 L / m)
Model Z35 : 17.4 GPM (66 L / m)
Operating the P.T.O. switches when the breaker or
general attachment is not mounted may cause
overheating.
015580-00E
Lock
Screw plug R (PT) 3/4
To Next Page
Loading...
