14. Transportation
2-85
Suspend the machine on the level ground as follows:
1) Swing the upperstructure so that the blade is behind the
operator’s seat.
2) Raise the blade to the highest limit.
3) Extend the hydraulic cylinders of the front implement
(except for the swing cylinder) to the maximum.
4) Stop the engine, and make sure that nothing is left
around the operator's seat before leaving the machine.
5) Fit the shackles to the suspending hooks on the front
side (one point) and the rear side (two points), and se-
curely fasten a sling belt (or a wire rope) to the shackles.
6) Suspend the machine above the ground, wait until the
machine is stable and then suspend it slowly.
Approximate shipping weight:
lbs. (kg)
Items Model Z27 Model Z35
Quick
coupler
Canopy Rubber
track
6945
(3150)
8157
(3700)
Cabin Rubber
track
7231
(3280)
8444
(3830)
Front side Rear side
Hook bores are on
both ends.
015659-00E
70.0 in. (1.8 m)
170.0 in. (4.3 m)
1°
015660-00E
001216-00X
To Next Page
Loading...
