9. Precautions for Servicing
1-20
WARNING Neglecting these instructions may cause extreme hazards.
• Spilled fuel and oil could cause a fire and they are dangerously slippery. Wipe up spills immediately.
• Close the fuel cap and oil cap securely.
• Never use fuel for cleaning.
• Provide good ventilation when replenishing fuel or oil.
• Before checking the radiator cooling water level, stop the
engine and wait until the engine and the radiator have
cooled down.
• Slowly loosen the cap to release the inner pressure before
removing the cap.
• Use an explosion-proof lighting source when checking the
fuel, the oil, the cooling water, or the battery electrolyte.
Failure to use a explosion-proof lighting source may
cause ignition to occur, inducing an explosion.
• When welding or repairing the electrical system, discon-
nect the negative terminal of the battery to interrupt the
electric circuit.
Precautions for fueling and oiling
Radiator cooling water level
Use an explosion-proof lighting source
Precautions for handling battery
000281-00X
000307-00X
000308-00X
000309-00X
To Next Page
Loading...
