Operation of the power generator
Page 23
5. OPERATION OF THE POWER GENERATOR
5.1. Transport of the power generator
Prerequisites:
• Power generator switched o and cooled down.
• No consumers or cable plugged in.
• Note the weight and dimensions; see technical data.
5.1.1. Transport via crane or forklift truck
I WARNING
SUSpENDED lOADS
Risk of serious injuries leading to death
• No personnel is allowed to be under or near suspended loads
• Lifting gear must be approved for the weight of the power generator
• Pay attention to the correct centre of gravity for industrial trucks
• Transport power generators at low lift heights
Secure any accident site and initiate immediate life-saving measures
NOTE
Local and user-based safety regulations must be observed during transport.
• For crane transport: Use only suitable and approved lifting gear!
• For forklift truck: Place the power generator on a suitable pallet.
5.1.2. Transport with integrated wheel set
• Fold open the fold-down handle upwards (Pos. 20-6).
• Raise the power generator on the fold-down handle.
• Pull the power generator to the utilisation site.
• Fold in the fold-down handle (Pos. 20-6).
To Next Page
Loading...