To Next Page

To Previous Page

Page14

owner's manual

rp800

Page15

owner's manual

rp800

DATA

BALANCE

DATA

BALANCE

DATA

BALANCE

DATA

BALANCE

F8- Start Up mode

With this menu you can decide if the default start set up of the Rp 800 will be factory set or user set.

Press the

Functions button

Select F8 using the

SELECT/TEMPO buttons

Pressing the DATA button the display shows the

current value (Factory by default).

Change the start up

mode using the DATA

buttons.

F9- Midi dump

This function allows to save to an external MIDI sequencer the programming data of the Rp 800.

Press the

Functions button

Select F9 using the

SELECT/TEMPO buttons

Pressing the DATA + button the Midi data bulk will start. The display will

show a countdown until the data transmission is over.

F10- Pc port mode

This menu sets the Rp 800 pc port mode: Pc2, Pc1, Macintosh computer.

Press the

Functions button

Select F9 using the

SELECT/TEMPO buttons

Pressing the DATA + button the display shows the

current value (PC2 by default).

Change mode using

the DATA +/- buttons.

F7- MIDI Filter

Using the Rp 800 to control other instruments connected via MIDI, it could be necessary to filter the

Control and Program change messages from the MIDI transmission.

Press the

Functions button

Select F7 using the

SELECT/TEMPO buttons

Pressing the DATA button the display shows the

current value (OFF by default).

Set the filter type

using the DATA

buttons.

Program Chng.

Control Chng.

Program+Control

Brand	GEM
Model	rp800
Category	Electronic Keyboard
Language	English

GEM rp800 User Manual

Table of Contents

Questions and Answers:

GEM rp800 Specifications

Related product manuals