GEM rp800 User Manual

Page4
owner's manual
rp800
Page5
owner's manual
rp800
DATA
BALANCE
Split the keyboard
BALANCE: Balancing the sounds volume in layer mode
Layering presets and preset variations
You can use both, preset and preset variation to create a Layer. Press PIANO1 and STRINGS1 buttons,
then press the VARIATION button.
Main sound
Layer
Layer
PRESET
VARIATION
Pressing the VARIATION button for the first time,
the variation in the layer sound is selected.
Main sound
Layer
Layer
VARIATION
VARIATION
Pressing the VARIATION button for a second time,
the variation in the main sound is selected.
The Rp 800 keyboard can be divided (splitted) in two parts. The instrument will automatically assign to the
left part a proper bass sound. Press the SPLIT button to divide the keyboard, enabling the split section.
Using a layer sound is possible to modify the volume ratio beetwen the two sections. Press the BALANCE
DATA buttons. The first time you press the button the display shows the current balance value. The next
touch modifies the balance ratio.
Increase
value
Decrease
value
NOTE:
Pressing any of the enabled preset buttons, the current preset switches again in Single mode.
Etc.
BALANCE VALUE RANGE
0=Max. Level for MAIN and LAYER
31=
Max. Lev. for the MAIN,
Min. Lev. for the LAYER
-31=
Min. Lev. for the MAIN,
Max. Lev. for the LAYER

GEM rp800 Specifications

General

Brand	GEM
Model	rp800
Category	Electronic Keyboard
Language	English