Disposal ZA08
Materials
The materials must be sorted according to material groups and taken to
the appropriate collection points.
Disposal of operating material
The operating material is very harmful to the environment if it is
improperly disposed of. Therefore, the instructions and information
contained in the safety data sheets must be adhered to when disposing of
the operating material.
The gear oil is considered to be a hazardous waste and must be
disposed in an environmentally friendly manner.
Disassembly of component groups
Preparation
Live components!
Risk of fatal injury from electric shock if touched
► Only trained, authorized staff may open the electrical
compartment
► Observe the safety symbols
1. Disconnect the mains supply, supply cables and additional units.
2. Remove all product covers.
3. Drain all existing lubricant supplies and dispose of accordingly.
The product is now prepared for disassembly.
The instructions in the third-party manufacturer’s documentation
must be followed!
To Next Page
