To Next Page

To Previous Page

Cinterion

Java Terminal Hardware Interface Description

2 Product Concept

 PLS62T-W_HID_v01 2018-06-20

Confidential / Prelimenary

Page 18 of 91

2 Product Concept

2.1 Key Features at a Glance

Feature Implementation

General

Incorporates Cinterion

Java module

The Java module handles all signal and data processing within the Java

Terminal. Internal software runs the application interface and the complete

GSM/UMTS/LTE protocol stack.

Frequency bands GSM/GPRS/EDGE:

Quad band GSM: 850/900/1800/1900MHz

UMTS/HSPA+ (I, II, IV, V, VIII, IX, XIX):

seven band: UMTS 800/850/900/(1700/2100)/1800/1900/2100MHz

LTE: (1, 2, 3, 4, 5, 7, 8, 12, 18, 19, 20, 28):

Twelve band LTE: 700/800/850/900/1700/2100/1800/1900/2100/2600MHz

GSM class Small MS

Output power (according

to release 99)

Class 4 (+33dBm ±2dB) for EGSM850

Class 4 (+33dBm ±2dB) for EGSM900

Class 1 (+30dBm ±2dB) for GSM1800

Class 1 (+30dBm ±2dB) for GSM1900

Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK

Class E2 (+26dBm ± 3dB) for GSM 900 8-PSK

Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK

Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK

Output power (according

to Release 8)

Class 3 (+24dBm +1/-3dB) for UMTS 800, WCDMA FDD BdXIX

Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdV

Class 3 (+24dBm +1/-3dB) for UMTS 900, WCDMA FDD BdVIII

Class 3 (+24dBm +1/-3dB) for UMTS AWS, WCDMA FDD BdIV

Class 3 (+24dBm +1/-3dB) for UMTS 1800, WCDMA FDD BdIX

Class 3 (+24dBm +1/-3dB) for UMTS 1900, WCDMA FDD BdII

Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI

Output power (according

to Release 9)

Class 3 (+23dBm ±2dB) for LTE 700, LTE FDD Bd12 <MFBI Bd17>

Class 3 (+23dBm ±2dB) for LTE 700, LTE FDD Bd28

Class 3 (+23dBm ±2dB) for LTE 800, LTE FDD Bd18

Class 3 (+23dBm ±2dB) for LTE 800, LTE FDD Bd19

Class 3 (+23dBm ±2dB) for LTE 800, LTE FDD Bd20

Class 3 (+23dBm ±2dB) for LTE 850, LTE FDD Bd5

Class 3 (+23dBm ±2dB) for LTE 900, LTE FDD Bd8

Class 3 (+23dBm ±2dB) for LTE AWS, LTE FDD Bd4

Class 3 (+23dBm ±2dB) for LTE 1800, LTE FDD Bd3

Class 3 (+23dBm ±2dB) for LTE 1900, LTE FDD Bd2

Class 3 (+23dBm ±2dB) for LTE 2100, LTE FDD Bd1

Class 3 (+23dBm ±2dB) for LTE 2600, LTE FDD Bd7

Power supply PLS62T-W USB:

Single supply voltage 8V to 30V

PLS62T-W LAN:

Single supply voltage 8V to 57V (Power-over-Ethernet support)

Brand	Gemalto
Model	Cinterion PLS62T-W USB
Category	Recording Equipment
Language	English

Gemalto Cinterion PLS62T-W USB User Manual

Table of Contents

Questions and Answers:

Gemalto Cinterion PLS62T-W USB Specifications