geminox FCX 22 C User Manual

- 19 -
INSTALLATION
Drainage by balanced flue offers the advantage of
making the boiler airtight in relation to the ventilation
conditions in the premises on which it is installed.
Drainage is possible through the wall next to the boi
-
ler or through the roof.
3.3.2 - horizontal balanced flue (C
13
)
GEMINOX recommendations
It is possible to install the boiler with a
balanced flue outlet when the wall next
to the boiler is an outside wall opening
on to a well-ventilated area.
Ensure that the level of sound produced
by the boiler, around the balanced flue
terminal, will not be a nuisance.
Do not place the flue terminal:
- at less than 2 m from a ventilation
hole or an opening,
- in front of the building or in a passa-
geway (risk of obstruction, smell of
combustion products, varying
amounts of steam depending on the
weather conditions).
- at less than 2 m from the ground or in
an area that can be accessed by a
young child (risk of obstruction - not
supllied).
Note:
- It is possible to raise the terminal using the flue
with elbow option.
- Each 45° elbow added reduces the total authori-
zed length by 0.5 m.
- Each 90° angle added reduces the total authori-
zed length by 1 m.
3.3.2.1 - 0,95 m straight horizontal balanced
flue kit (option)
See kit assembly guide
- Useful length afte assy.- l = 0.77 m
3.3.2.2 - 3 m angled horizontal balanced flue
(option)
3.3.2.3 - 3 m angled horizontal balanced flue -
straight (option)
Maximum linear length of the horizontal flue :
Lmax = 5 m
!
Reference Length (mm)
N40.28399
950
Reference
V72.28414
Reference
V72.31135
FCX-12-0
Fig. 18
FCX-13-0
Fig. 19
FCX-63-0
Fig. 20

geminox FCX 22 C Specifications

General

Brand	geminox
Model	FCX 22 C
Category	Boiler
Language	English