Genadyne Biotechnologies | DMR-06-091- Rev F
Operating the Device
Starting Up / Powering Down
Press the Power Button once. The LCD will light up. The pump will start running. Suction is
immediately available.
To Power Down the unit, press the Power Button once. A timer will appear on the main screen and
start counting down. If the Power Button was pressed by accident, the user can press the Power Button
again to turn on the machine and resume therapy.
The pump will always remember the previous settings before it was powered off.
Therapy Modes
The Genadyne XLR8+ provides the user with 2 therapy modes:
1. Continuous Therapy
2. Variable Therapy
Continuous Therapy Mode
If a symbol C is observed on the top left corner of the screen, this means Continuous Therapy is active.
The system sets it at Continuous Therapy mode by default. If the symbol V is observed, this means
Variable Therapy is in active.
Treatment Time: 7h: 00m
Up Time: 7m @ 125 mmHg
Down Time: 5m @ 0 mmHg
To Next Page
Loading...
