Genadyne Biotechnologies | DMR-06-091- Rev F
Alert Log
All Alerts are logged and saved in the XLR8+ memory. Only the last 16 alerts are displayed, by which
the latest alert will be at the top of the list.
To enter into the Alert Log:
1. Press Menu / Select button.
2. Navigate to Alert Setup by using the Up / Down button and press the Menu / Select button to
enter into the Alert Setup function.
3. Navigate to the Alert Log by using the Up / Down button and press the Menu / Select button to
enter into the Alert Log screen.
4. All the past 16 Alerts will be shown on the screen.
5. To acknowledge them, scroll to the desired Alert Notification and press the Menu / Select button.
6. The Alert bell will stop once acknowledged.
7. The asterisk (*) on the left side of the notification WILL NOT disappear until the problem is fixed.
8. To toggle and show the time and date stamp, please press the Lock / Unlock key.
To exit to the main screen, press and hold on to the Exit / Cancel button for 5 seconds.
The Alert Notification Icon above will appear on the top right corner of the screen whenever an alert
event occurs. The number will indicate how many alerts occurred that were unacknowledged so that
the caregiver can view a brief history of the alert events.
To clear the Alert Notification Icon:
1. Press Menu / Select button.
2. Navigate to Alert Setup by using the Up / Down button and press the Menu / Select button to
enter into the Alert Setup function.
3. Navigate to the Alert Log by using the Up / Down button and press the Menu / Select button to
enter into the Alert Log screen.
4. Scroll to the desired Alert Notification and press the Menu / Select button to acknowledge them.
5. The Alert Notification Icon will clear once acknowledged.
To Next Page
Loading...
