What causes the Power LED (A) to flicker on Generac Power Systems Measuring Instruments?
If the Power LED (A) is flickering on your Generac Power Systems Measuring Instruments, it is likely due to a loose electrical connection to the Mobile Link cellular unit. Verify the harness is correctly connected to the battery and reset the connector to the Mobile Link cellular unit.
Why is the Server Connection LED (D) flashing on my Generac Power Systems Measuring Instruments?
If the Server Connection LED (D) is flashing on your Generac Power Systems Measuring Instruments, the Mobile Link cellular unit is connected to the Mobile Link servers, but the connection is not yet verified. Wait for a server response, as the connection process may take up to 10 minutes.
General safety guidelines and warnings for operating the equipment.
Specific hazards related to general safety during operation and maintenance.
Hazards associated with electrical shock and electrocution during use.
Risks of explosion and fire due to fuel, vapors, and combustible materials.
Procedure to test Wi-Fi signal strength before generator installation.
Detailed instructions for configuring Wi-Fi settings directly on the generator controller.
Steps to download the app and register the generator with Mobile Link.
Common problems and solutions for Wi-Fi connection issues.
General| Category | Measuring Instruments |
|---|---|
| Manufacturer | Generac Power Systems |
| Product Name | Mobile Link |
| Function | Remote monitoring of generator status |
| Compatibility | Compatible with Generac generators |
| Connectivity | Wi-Fi or Cellular |
| Subscription | Required |
| Mobile App | Available for iOS and Android |
| Monitored Parameters | Generator status |
| Power Source | Generator battery |
To Next Page
